The Steel Fasteners for License Plates and License Plate Frames - Standard - Qty 4 # CR80230 are 1/4 inch diameter by 3/4 inch long. This is the standard diameter for license plate hardware, so if you have a smaller hole, you may want to consider enlarging it for compatibility or using stainless or zinc plated screws from a hardware store that will fit the current holes. view full answer...
From the rearmost hitch pin hole to the face of the Shocker Hitch Impact Cushioned Adjustable Clevis # SHK93RR ball mount is 8-3/8" (see bottom right figure of attached photo). If you're wanting to know what the distance is to the back side of the ball mount that is 4-1/2" instead (see bottom left figure of attached photo).
The "face of the hitch" is a phrase that's used interchangeably for different things so if you were talking about something else just let me know! view full answer...
For your 2011 Lexus ES 350, the only available hitches are Class II 1-1/4 hitch receivers. Technology has advanced where 2" hitches are being designed for newer models, but for your vehicle, a Class II is as good as it gets.
The only solution here would be to use a hitch adapter # 80303 to turn your 1-1/4" into a 2" hitch. I would be cautious though, since this method halves your hitch capacity. Instead of 300lbs tongue weight, you will have 150 lbs tongue weight capacity. Rad Electric... view full answer...
We carry one bike rack that might work for you. The Hollywood Racks Sport Rider SE, part # HLY74FR, platform rack can support up to 80 pound bikes and it fits a 1-1/4 inch receiver hitch.
As long as your hitch is a Class II this rack will work for you. It does not fit Class I hitches.
If this doesn't work let me know the year, make, and model of your vehicle and I'll look into other options for you. view full answer...
The Curt Trailer Hitch Receiver # C13303 actually doesn't fit your 2014 Lexus ES.
If you have an ES 350 then the Draw-Tite trailer hitch those fits is part # 36530 which measures 9-1/8" from the top of the mounting brackets to the bottom of the mounting brackets. From the top of the mounting brackets to the receiver though is 8-1/8".
For an ES 300h the only trailer hitch that fits is the Curt # C11362 which has an overall height measurement of 8-3/16".
Attached are installation instructions... view full answer...
Yes, there is! Since your 2024 Lexus ES 350 does not have rails or the glass roof top you can use the roof rack by Yakima which includes the following parts:
Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06170
This aero bar roof rack system has a 165 lbs capacity. I have attached a couple... view full answer...